Specifications
Power supply parameters: – single-phase voltage of alternating current (220) In frequency (50 ± 0,5) Hz; – rated current strength is not more than 15A. Attention: In the case of low voltage in the mains (below 190V) or high voltage (over 240V), it is necessary to install a voltage regulator. UPS output voltage parameters: – output voltage of alternating current (220 ^ d4) V; – frequency of output voltage (50 ± 0,1) Hz; – coefficient of nonlinear distortion at a nominal load of not more than 5%; – load power factor from 0.5 to 1.0 at a peak factor of not more than 2; – switching time “inverter-network” and “network-inverter” is not more than 1 ms. Load parameters: – rated power of the load is not more than 2 kW; When prescribing a given capacity load, the enterprise reserves the observance of the product warranty rules. Battery parameters: – type helium accumulators 200 A / H – Number of batteries 4 pcs .; – capacity of one battery 200 A / H; – The nominal voltage of the battery is 12 V; – The nominal output voltage of the battery is 24/48 V. |